## Name

mkvpropedit — Modify properties of existing Matroska™ files without a complete remux

## Synopsis

`mkvpropedit` [options] {source-filename} {actions}

## Description

This program analyses an existing Matroska™ file and modifies some of its properties. Then it writes those modifications to the existing file. Among the properties that can be changed are the segment information elements (e.g. the title) and the track headers (e.g. the language code, 'default track' flag or the name).

Options:

`-l`, `--list-property-names`

  Lists all known and editable property names, their type (string, integer, boolean etc) and a short description. The program exits afterwards. Therefore the `source-filename` parameter does not have to be supplied.

`-p`, `--parse-mode` `mode`

  Sets the parse mode. The parameter '`mode`' can either be '`fast`' (which is also the default) or '`full`'. The '`fast`' mode does not parse the whole file but uses the meta seek elements for locating the required elements of a source file. In 99% of all cases this is enough. But for files that do not contain meta seek elements or which are damaged the user might have to se the '`full`' parse mode. A full scan of a file can take a couple of minutes while a fast scan only takes seconds.

Actions:

`-e`, `--edit` `selector`

  Sets the Matroska™ file section (segment information or a certain track's headers) that all following add, set and delete actions operate on. This option can be used multiple times in order to make modifications to more than one element.

  See the section about edit selectors for a full description of the syntax.

`-a`, `--add` `name`=`value`

  Adds a property `name` with the value `value`. The property will be added even if such a property exists already. Note that most properties are unique and cannot occur more than once.

`-s`, `--set` `name`=`value`

  Sets all occurences of the property `name` to the value `value`. If no such property exists then it will be added.

`-d`, `--delete` `name`

  Deletes all occurences of the property `name`. Note that some properties are required and cannot be deleted.

Other options:

`--command-line-charset` `character-set`

  Sets the character set to convert strings given on the command line from. It defaults to the character set given by system's current locale.

`--output-charset` `character-set`

  Sets the character set to which strings are converted that are to be output. It defaults to the character set given by system's current locale.

`-r`, `--redirect-output` `file-name`

  Writes all messages to the file `file-name` instead of to the console. While this can be done easily with output redirection there are cases in which this option is needed: when the terminal reinterprets the output before writing it to a file. The character set set with `--output-charset` is honored.

`--ui-language` `code`

  Forces the translations for the language `code` to be used (e.g. '`de_DE`' for the German translations). It is preferable to use the environment variables `LANG`, `LC_MESSAGES` and `LC_ALL` though. Entering '`list`' as the `code` will cause mkvextract(1) to output a list of available translations.

`-v`, `--verbose`

  Be verbose and show all the important Matroska™ elements as they're read.

`-h`, `--help`

  Show usage information and exit.

`-V`, `--version`

  Show version information and exit.

`@`options-file

  Reads additional command line arguments from the file `options-file`. Lines whose first non-whitespace character is a hash mark ('`#`') are treated as comments and ignored. White spaces at the start and end of a line will be stripped. Each line must contain exactly one option. There is no meta character escaping.

  The command line 'mkvpropedit source.mkv --edit track:a2 --set name=Comments' could be converted into the following option file:

      # Modify source.mkv
      source.mkv
      # Edit the second audio track
      --edit
      track:a2
      # and set the title to 'Comments'
      --set
      title=Comments

## Edit selectors

The `--edit` option sets the Matroska™ file section (segment information or a certain track's headers) that all following add, set and delete actions operate on. This stays valid until the next `--edit` option is found. The argument to this option is called the edit selector.

### Segment information

The segment information can be selected with one of these three words: '`info`', '`segment_info`' or '`segmentinfo`'. It contains properties like the segment title or the segment UID.

### Track headers

Track headers can be selected with a slightly more complex selector. All variations start with '`track:`'. The track header properties include elements like the language code, 'default track' flag or the track's name.

`track:``n`

  If the parameter `n` is a number then the `n`th track will be selected. The track order is the same that mkvmerge(1)'s `--identify` option outputs.

`track:``t` `n`

  If the parameter starts with a single character `t` followed by a `n` then the `n`th track of a specific track type will be selected. The track type parameter `t` must be one of these four characters: '`a`' for an audio track, '`b`' for a button track, '`s`' for a subtitle track and '`v`' for a video track. The track order is the same that mkvmerge(1)'s `--identify` option outputs.

`track:`=`uid`

  If the parameter starts with a '`=`' followed by a number `uid` then the track whose track UID element equals this `uid`. Track UIDs can be obtained with mkvinfo(1).

`track:`@`number`

  If the parameter starts with a '`@`' followed by a number `number` then the track whose track number element equals this `number`. Track number can be obtained with mkvinfo(1).

### Notes

Due to the nature of the track edit selectors it is possible that several selectors actually match the same track headers. In such cases all actions for those edit selectors will be combined and executed in the order in which they're given on the command line.

## Examples

The following example edits a file called '`movie.mkv`'. It sets the segment title and modifies the language code of an audio and a subtitle track. Note that this example can be shortened by leaving out the first `--edit` option because editing the segment information element is the default for all options found before the first `--edit` option anyway.

    $ mkvpropedit movie.mkv --edit info --set "title=The movie" --edit track:a1 --set language=fre --edit track:a2 --set language=ita

The second example removes the 'default track flag' from the first subtitle track and sets it for the second one. Note that mkvpropedit(1), unlike mkvmerge(1), does not set the 'default track flag' of other flags to '0' if it is set to '1' for a different track automatically.

    $ mkvpropedit movie.mkv --edit tracks:s1 --set flag-default=0 --edit tracks:s2 --set flag-default=1

## Exit codes

mkvpropedit(1) exits with one of three exit codes:

- `0` -- This exit codes means that the modification has completed successfully.

- `1` -- In this case mkvpropedit(1) has output at least one warning, but the modification did continue. A warning is prefixed with the text '`Warning:`'. Depending on the issues involved the resulting files might be ok or not. The user is urged to check both the warning and the resulting files.

- `2` -- This exit code is used after an error occured. mkvpropedit(1) aborts right after outputting the error message. Error messages range from wrong command line arguments over read/write errors to broken files.

## See also

mkvmerge(1), mkvinfo(1), mkvextract(1), mmg(1)

## WWW

The latest version can always be found at the MKVToolNix homepage.